Search

CG Motorsport Twin Plate Kit

Manufacturer: CG Motorsports
SKU: CG Twin Plate kit BAM/APX/AJQ/ARY
Manufacturer part number: 800-0108-S
£609.95
£625.00
Availability: In stock

CG Motorsport's New Twin Disc Clutch Kit

 This kit includes the following:

  • Twin plate Cover (Lug) in Anodized Bronze
  • Top Intermediate Plate
  • Bottom Intermediate Plate
  • Unlimited Choice of Drive Plate Spline Measurements.

Please Note - This kit does not include a flywheel. You will need to use this with a 184mm flywheel which will accept this 6 Bolt Lug Clutch cover. Please contact us if further info is required regarding this prior to purchase.

CG Motorsport's Lug Twin Plate Cover assembly utilises a one piece aluminium alloy cover and lug design which provides structural strength, lower inertia and cooler running. This design also allows for friction dust to freely escape.

Sintered clutches are primarily used for circuit race applications and do not suit applications where a degree of clutch slip is required (such as rallying, hill climbing, etc). CG Motorsport's Most Popular Clutch & Flywheel Kit

Organic drive plate style is perfect for intensely modified cars that are daily driven. (Upto 450lbft)

Sintered or Cerametalic drive plate option will allow for much more aggressive driving and gear changes. (Upto 550lbft)

  • 6 bolt, one piece cover and lugs, machined from aluminium alloy.
  • Cover style allows dust and debris to escape.
  • Bronze Hard anodised.
  • Individually tested

Push Type.

  • Match machined, balanced and clutch load recorded.
  • Weighted precisely to ensure decisive gear changes and increased acceleration.

As the Twin Disk Clutch Kit requires the use of a Solid Flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in anyway affect the performance of the clutch kit.

Please contact us for more information on our Twin Disc Range.

Please Note - These kits do not include a flywheel bolts.

A 500 mile break in is required with this clutch.

*** ONLY AVAILABLE IN THE UK ***

PLEASE MESSAGE IF YOU REQUIRE A POSTAGE COST OVERSEAS

Products specifications
Component Type Transmission
Write your own review Close Review Form
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*
Description

CG Motorsport's New Twin Disc Clutch Kit

 This kit includes the following:

  • Twin plate Cover (Lug) in Anodized Bronze
  • Top Intermediate Plate
  • Bottom Intermediate Plate
  • Unlimited Choice of Drive Plate Spline Measurements.

Please Note - This kit does not include a flywheel. You will need to use this with a 184mm flywheel which will accept this 6 Bolt Lug Clutch cover. Please contact us if further info is required regarding this prior to purchase.

CG Motorsport's Lug Twin Plate Cover assembly utilises a one piece aluminium alloy cover and lug design which provides structural strength, lower inertia and cooler running. This design also allows for friction dust to freely escape.

Sintered clutches are primarily used for circuit race applications and do not suit applications where a degree of clutch slip is required (such as rallying, hill climbing, etc). CG Motorsport's Most Popular Clutch & Flywheel Kit

Organic drive plate style is perfect for intensely modified cars that are daily driven. (Upto 450lbft)

Sintered or Cerametalic drive plate option will allow for much more aggressive driving and gear changes. (Upto 550lbft)

  • 6 bolt, one piece cover and lugs, machined from aluminium alloy.
  • Cover style allows dust and debris to escape.
  • Bronze Hard anodised.
  • Individually tested

Push Type.

  • Match machined, balanced and clutch load recorded.
  • Weighted precisely to ensure decisive gear changes and increased acceleration.

As the Twin Disk Clutch Kit requires the use of a Solid Flywheel there is a chance you may experience some harmonically transmitted noises when installing this kit. This type of noise is normal and acceptable but will vary from vehicle to vehicle. Most of these noises are covered up by the dual mass flywheel and are extremely difficult to hide when running a single mass. These noises do not in anyway affect the performance of the clutch kit.

Please contact us for more information on our Twin Disc Range.

Please Note - These kits do not include a flywheel bolts.

A 500 mile break in is required with this clutch.

*** ONLY AVAILABLE IN THE UK ***

PLEASE MESSAGE IF YOU REQUIRE A POSTAGE COST OVERSEAS

Products specifications
Component Type Transmission